The service life of a supercharger can be increased by strictly following the maintenance requirements and cleaning the engine or oil sump before installing the supercharger as follows
Method 1: - Remove the bad supercharger - Add a certain amount of oil mixture (30% oil + 70% diesel) - Plug the supercharger into the oil return tube or seal the outlet of the oil inlet tube - Start the engine, idle speed for 1-2 minutes, drain the oil mixture (such as dirty oil Clean or replace the supercharger oil inlet pipe, clean the oil pan, remove the air filter - Install the new supercharger and pre-lubricate the oil inlet pipe with oil before installing the oil inlet pipe, install a new filter and fill the filter with oil, install other pipes - Start the engine, idle for 3 minutes to see if there is air leakage.
Method 2: - drain the diesel engine oil; - remove the oil pan and clean it, and then install it; - remove the oil inlet pipe of the supercharger, remove the oil scale and impurities inside the pipe, clean the inner wall, and then install it on the engine; - add new oil of the grade specified by the engine manufacturer; replace it with new oil of the grade specified by the engine manufacturer. Replace the oil filter with a new one that conforms to the engine manufacturer's regulations; - Without the supercharger first, connect the supercharger oil inlet pipe to the oil return pipe, start the engine and run it at idle for 3 minutes.
After completing the above steps (method one or method two), install the supercharger. With this, the life of the supercharger will be greatly improved!
Drop us an email, let’s discuss more details
Copyright © Shijiazhuang Hovor Diesel Engine Co., Ltd. All Rights Reserved | Sitemap | Technical Support: